MTD hs720r Manuale dell'Operatore Scaricare il pdf (Pagina 16)

2. Pulltheoldinnerreelwithexistinglinefromtheouter

spool.

3. Inserttheendsof theprewoundinnerreellineinto

theouterspooleyelets(Fig.27).Pushthenewinner

reel,arrowsideup,intotheouterspool.

Fig. 27

Hold the inner reel in place and install the bump

knob, spring and foam seal. Press down and turn the

bump knob clockwise. Grasp the ends and pull

firmly to release the line from the holding slots in the

inner reel (Fig. 25).

Releasing the Inner Reel

If the SpeedSpool _ does not release line correctly, pull

the ends of the line firmly from the spool (Fig. 25). If this

does not the release line, follow the Cleaning the

SpeedSpoof "_instructions.

CLEANING THE SPEEDSPOOL "_

Cleaning the SpeedSpool C'¢may be necessary if:

A jammed or excessive line must be removed

The SpeedSpoo! u_becomes difficult to wind or does

not operate correctly when bumping the head on the

ground

1. Hold the outer spool, and unscrew the bump knob

counterclockwise (Fig. 28).

2. Pull out the bump knob, spring and foam seal

(Fig. 26).

Remove any existing line from the inner ree! before

cleaning. Remove any debris or grass from the knob,

spring, inner reel and foam seal. Wash the inner reel

with warm soapy water (Fig. 29).

Inner Reel

Fig. 29

Clean the shaft and the inner surface of the outer

spool. To clean the shaft underneath the plunger,

press down on the plunger (Fig. 30). Remove any dirt

or debris from the shaft.

Shaft \

Plunger

Fig. 30

NOTE: The inner reel must be totally dry before

reinstalling it into the outer spool. Do not

lubricate the inner reel or outer spool assembly.

6. Place the inner reel into the outer spool.

7. Place the bump knob, spring and foam seal onto the

inner reel (Fig. 26).

8. Press the bump knob down and tighten clockwise.

9. Install new line as described in Line Installation for

the SpeedSpoof "_.

Fig. 28

3. Pull the inner reel with existing line from the outer

spool.

SPEEDSPOOL C_REPLACEMENT PARTS

Replacement Line ........................ 181472

Replacement Line Cartridge ................ 181460

inner Reel Spring ........................ 181465

Foam Seal .............................. 181467

inner Reel .............................. 181464

Bump Head TM Assembly ................... 181468

(Bump Knob, inner Reel, Spring)

These SpeedSpool replacement parts can be

purchased from your local authorized dealer.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 28 29

Commenti su questo manuale

Nessun commento

MTD hs720r Manuale dell'Operatore Pagina 16

Commenti su questo manuale

Prodotti e manuali riguardandi Tosaerba MTD hs720r