Mtd 249-640A Manuale Utente

FIFTY CENTSrOWNER’S MANUALASSEMBLY OPERATION MAINTENANCE PARTS LISTModel No. 249-640AImportant:Read Safety Rules and Instructions CarefullyPRINTED IN

USING YOUR LOG SPLITTERYour log splitter is designed for safe, efficient, operation. CARE, OF COURSE, MUST BE EXERCISED THAT HANDS AR

NOTEWhen the pressure relief valve opens a loud high pitched sound is heard and engine labors.HOSE CLAMPSCheck the hose clamps on the

NOTEThe strainer tube assembly is 53" long.4. Clean and reassemble using- a hydraulic pipe sealant on the threads.PRESSURE RELIEF VALVE SE

3. Cleaning engine—This is an aircooled engine which operates most efficiently when the cooling fins are clean.,si»—^ean cylinder fins and unde

249-640A14

PARTS LIST FOR LOG SPLITTER MODEL No. 249-640ARef.^No.PartNo.ColorCodeDESCRIPTIONNewPartRef.No.PartNo.ColorCodeDESCRIPTIONNewPart1 737-0153Return Elbo

PARTS INFORMATIONPOWER EQUIPMENT PARTS AND SERVICEParts and service for all AATD manufactured power equipment are available through the authoriz

♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦ ♦ ♦♦ ♦UMITED WARRANTY♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦For one year from the date of origina

IMPORTANTIt is suggested that this manual be read in its entirety before attempting to assemble or operate. Keep this manual in a safe place for futur

TOOLS REQUIRED:(1) 1-1/8" wrench or adjustable wrench(2) 1/2" wrenches(1) 3/4" wrench(2) 7/16" wrenches (2) 9/16" wrenche

ASSEMBLY INSTRUCTIONS1. Block up rear end of log splitter so that the rear wheels may be assembled.2. Place spacers (C) on axle, then whee

8. Place end of engagement rod on valve spool and secure with hex screw (Q) and hex nut (R). See figure 7.FIGURE?9. Thread pivot b

NOTEUse hydraulic sealant tape or pipe sealant on threads.13. Assemble the other end of forward stroke high pressure hose to 90° pipe ada

FIGURE 14LOG SPLITTER:The oil in the reservoir should be changed every (100)hours of operation.Check oil in log splitter reservoir before every use;Se

BEFORE STARTINGDuring initial break-in period, oil level should be =»»»—closely. See ENGINE MAINTENANCE.Jse MS classification oil. Do not use o